|
位置：首页 >> 期刊文章
|
|
摘要：
|
|
建立港口正面吊运车防倾覆过载保护装置的ADAMS动力学模型,并作仿真分析。得到了连锁与下锁接触距离,锁钩接触力、接触力矩,后耳板与连锁铰接点处橡胶衬套位移、受力,连锁、前耳板各自铰点处的约束力,连锁钩点、下锁钩点位置等随时间变化的曲线。所得结果可作为防倾覆过载保护装置优化设计的参考依据。
|
|
The dynamic model of anti-overturning overload protection device for a reach stacker is established,and the simulation analysis is carried out.Then the contact distance of connecting lock and bottom lock,lock hook contact force and torque,the displacement and force of rubber bushing at hinge point of back ear plate and connecting lock,constrained force for each articulated point of connecting lock and front ear plate,the coordinates of connecting and bottom lock hook points versus time curves are described.The results can provide references for optimization design of the proposed device.
|
|
基金项目：
|
|
国家“十一五”科技支撑计划项目资助(2007BAD35B01);;
天津商业大学SRT项目资助(2010026)
|
|
作者简介：
|
|
|
|
参考文献：
|
|
[1]周伟兴.装卸搬运车辆[M].北京:人民交通出版社,2001.
[2]何三全.综合运输装卸机械[M].北京:人民交通出版社,2002.
[3]胡宗武,顾迪民.起重机设计计算[M].北京:科学技术出版社,1989.
[4]张连文.集装箱正面吊运机的ADAMS运动学分析[J].工程机械,2007,38(7):19-21.
[5]GB 3811-2008,起重机设计规范[S].
[6]GB/T 5141-2005,平衡重式叉车稳定性基本试验[S].
[7]ISO/TC 110/SC 2.ISO 10525-1997,Counterbalanced trucks han-dling freight containers of 6 m(20 ft)length and above-Additionalstability tests[S].
[8]郑建荣.Adams虚拟样机技术入门与提高[M].北京:机械工业出版社,2003.
[9]李军,邢俊文,覃文洁.Adams实例教程[M].北京:北京理工大学出版社,2002.
[10]MSC.SOFTWARE Corporation.ADAMS Training Guide[M].SantaAna CA USA,2004.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
|