|
位置：首页 >> 期刊文章
|
|
摘要：
|
|
三峡库区具有特殊的水文地质条件,散货出口码头结构型式和装卸工艺相对落后。文章结合重庆某专用矿石出口码头的建设,提出3种适用于大型散货出口码头的结构型式和相应的装卸工艺。研究认为架空直立墩式结构及相配套的装卸工艺具有占用岸线短、使用方便、装卸效率高和造价低等优点,适宜在三峡库区大型散货出口码头建设中推广应用。
|
|
There are special hydraulic characteristics in Three Gorges Reservoir area;the structural shape and handling tech-nology of bulk cargo export terminal are relatively backward.In this paper,combining a dedicated bulk export terminal in Chongqing,bring up there kinds structure and handling technology.By analyzing the natural conditions of bulk cargo wharf which lies to the upriver of Yangtze River with huge water fluctuation,studies suggest handling technology that over-head pier bulk cargo export terminal and ancillary handling technology have good advantages such as shoreline occupied by a short,easy to use,efficient,low cost and so on.So it is suitable for popularizing and applying in the construction of bulk cargo export terminal in Three Gorges Reservoir area.
|
|
基金项目：
|
|
重庆市高校优秀人才支持计划资助课题(2008-1-26)
|
|
作者简介：
|
|
|
|
参考文献：
|
|
[1]王多垠,田建柱.大水位差架空直立式集装箱码头结构型式研究[J].重庆交通大学学报:自然科学版,2008,27(1):139-143.
[2]王多垠,张华平,史青芬,等.大水位差仝直桩框架码头排架中的水平撞击力分配系数研究[J].中国港湾建设,2009,(3):23-25.
[3]厉泽逸.三峡工程库区散货码头装卸工艺设计[J].人民长江,2003,34(1):17-18.
[4]王诚,王维.长江上游大水位差散货码头装卸工艺及设备研究[J].港口装卸,2006,(2):16-18.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
|