|
位置：首页 >> 期刊文章
|
|
摘要：
|
|
本文列举了大圆筒结构在国内的应用实例及施工工艺技术难题。应用液压振动锤组成功地振沉混凝土圆筒和钢结构圆筒,在国内外尚属首次,振动下沉这种新的施工工艺简便快速,解决了深埋式大圆筒施工工艺难题,为大圆筒结构的推广应用创造了条件。
|
|
The paper presents domestic cases of engineering practice in which large diameter hollow cylinders have been used and the technological problems encountered.It was the first time both at home and abroad that a hydraulic vibration driver group was employed to successfully drive in position both concrete hollow cylinders and steel hollow cylinders.The new technology of driving by vibration is simple and works rapidly,solving the technological difficulties encountered when large diameter hollow cylinders were installed with the deepembedding method,thus bringing about favorable conditions for promoting and wide use of the large diameter cylindrical structures.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
|
[1] 戴家禄.大直径圆筒结构在天津港的应用与发展[J].港口工程,1995,(2).
[2] 中港一航局.大圆筒结构施工工艺开发研究[R].天津:中港第一航务工程局,2000.
[3] 周锡礻乃,王晖,韩桂军.大直径薄壳圆筒结构的设计计算[J].港工技术,1995,(2).
[4] 周锡礻乃,刘佳岭.大圆筒结构在港口工程中的应用以及结构设计计算中的几个问题[J].港口工程,1994(5).
[5] 张廷永,李聪.直立式薄壁大圆筒结构的施工[J].港工技术,2002(3).
[6] 范智杰.大直径钢筋混凝土圆筒滑开模板施工工艺[J].水运工程,1996(8).
[7] 杨振寰.无底大圆筒在南沙码头中的应用[J].水运工程,2000(5).
[8] 杨联正,马永远.对大直径圆筒下沉施工工艺的探讨[J].港工技术,1999(1).
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
|