期刊总览首页编委会理事会期刊检索过刊浏览广告合作联系我们EngLish

欢迎投稿    欢迎订阅    衷心感谢广大读作者的大力支持与合作!

位置:首页 >> 期刊文章
剪切速率对粉质粘土抗剪强度的影响
作者:阚卫明 刘爱民  
单位:中交天津港湾工程研究院有限公司 中交天津港湾工程研究院有限公司 天津300222 天津300222 
关键词:粉质粘土  抗剪强度  剪切速率  摩擦角 
分类号:TU442
出版年,卷(期):页码:2008,32(2):23-26
摘要:
通过对宁波粉质粘土固结快剪试验结果的分析可以看出,剪切速率对宁波粉质粘土固结快剪的摩擦角影响很大,剪切速率较大时,摩擦角较小;剪切速率相对较小时,摩擦角相对较大。对剪切速率比较敏感的粉质粘土在做固结快剪试验时,应采用较大的剪切速率。
It can be seen from the analyses of the results of the consolidated quick shear tests of silty clay in Ningbo that the shear rate influenced a lot the frictional angle of the silty clay in consolidated quick shear tests.When the shear rate was higher,the frictional angle was smaller;and when the shear rate was relatively small,the frictional angle was larger.For silty clay more sensitive to the shear rate,higher shear rate should be adopted when the silty clay is subject to the consolidated quick shear tests.
基金项目:
作者简介:
参考文献:
[1]GB/T50123-1999,土工试验方法标准[s]. [2]潘永坚,楼希华.不同剪切速率下软土的直剪固结快剪抗剪强度[J].中国港湾建设,2005(2):37-39.
服务与反馈:
文章下载】【加入收藏
首页 编委会 理事会 期刊检索 过刊浏览 广告合作 联系我们 EngLish

津ICP备11001124号-2
《中国港湾建设》编辑部     地址:天津市河西区大沽南路1002号
电话:(022)28348642   传真:(022)28348642 
邮箱:zggwjs@126.com    邮政编码:300222