|
位置：首页 >> 期刊文章
|
|
摘要：
|
|
为了提高自航耙吸挖泥船耙头疏浚饱和硬质土时的效率,根据模型相似的原理推导了耙头的局部模型试验方法,并通过该方法试验了不同位置高压冲水辅助下的挖掘效果,分析了垂直高压冲水和耙齿内高压冲水在耙齿挖掘中的作用,并根据两种高压冲水的作用机理,提出了沿齿面冲水的辅助挖掘新型式,进一步提高了耙头的挖掘能力和疏浚效率,同时降低了耙头的挖掘阻力。研究了耙齿对地压力、耙头吸腔密封度等因素的影响,并做出了调整和改进。结果表明,改进后的模型耙头疏浚坚硬的黄骅港密实砂质粉土时,泥浆密度换算到原型耙头可达1.19 t/m3,相对于国内现有耙头同类土质下的施工密度1.10 t/m3已有大幅提高。
|
|
In order to improve the dredging efficiency of drag-heads on trailing suction hopper dredgers(TSHD),especially for excavating saturated stiff clay,a partial model experiment was introduced by authors based on the theory of simila-rity.With the model,they tested the excavating effects with the assistance of high pressure jets at different positions,and the function of vertical jets and jets inside the drag-teeth during dredging was analyzed.According to functional mechanism of these jets,authors put forward a new jet,which flushed along drag-teeth,improved both excavating capability and dredging efficiency,and also reduced cutting resistance.In addition,the influence of drag-teeth's pressure against riverbed and sealed degree of the draghead were also tested,and some adjustments and improvements were made.The results showed that when dredging fine hard compacted sand from Huang-Hua harbor,the improved model draghead could achieve a high slurry concentration of 1.19 t/m3,which was significantly enhanced compared to using most domestic draghead used nowadays.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
|
[1]SVandycke,MVan den Broeck,KThomas.The DRACULA-sys-tempushes the limits of hopper dredgers in cemented sand[C].Pro-ceedings ofCEDADredgingDays,2005.
[2]A ship to shape the market[J].DPC(Dredging and port construc-tion),2004(4).
[3]Royal Boskalis Westminster nv.Annual report[R].2004.
[4]G A P L Teheux.Development of BI-Stage Dragehead-The com-parison of different jet-configurations in a draghead[C].ProceedingsofCEDADredgingDays,2003:175-183.
[5]P MVercruijsse,GJ P Versteeg,S C Ooijens,C F Hofstra,F Lin,CH MKramers.Wild DragonR-Developinga draghead for dredgingextreme fine hard packed aquatic soils[C].Proceedings of CEDADredgingDays,2005.
[6]王振瑯.浅述耙头[J].船舶,2004,(4):48-51.
[7]丁勇,王忠贤.新型主动耙头的开发和应用[J].船舶,2005(1):52-55.
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
|